
Online Partial Discharge Monitoring System For Cable
Power supply: AC 220V / solar power / CT-based power harvesting
Communication method: RS-485 / wireless
Installation: Wall-mounted
Ambient temperature: -45 to 80°C
Operating relative humidity: 0% to 95%
The online partial discharge monitoring system for cables serves as an alternative to periodic offline partial discharge testing and manual inspections. It enables continuous, real-time monitoring, allowing for the detection of operational hazards that might otherwise go unnoticed during offline tests.
Description
I. Product Introduction:
Online partial discharge monitoring system for cable uses wideband pulse detection and digital signal processing to reduce interference, locate discharge sources, and analyze monitoring data. Power cables are essential for reliable electricity transmission. Insulation defects in cable bodies, joints, and terminations can cause partial discharge and lead to unexpected failures. It helps operators identify insulation problems early, assess cable conditions, and make informed maintenance decisions. Suitable for high-voltage cable systems, the online partial discharge monitoring system for cable supports reliable operation, reduces unexpected downtime, and improves maintenance efficiency.
II. Model Explanation

III. Product Details/Advantages

- High Detection Sensitivity: Detects weak partial discharge signals at picocoulomb (pC) levels, helping identify early insulation defects before they develop into serious problems.
- Intelligent Fault Diagnosis: Analyzes discharge patterns to identify potential insulation defects, helping maintenance teams understand fault types and assess their severity.
- Visual Monitoring & Analysis: Displays monitoring results through 2D/3D PRPD patterns, trend curves, and cable route diagrams, making discharge activity easier to track and locate.
- Easy System Integration: Supports standard communication protocols such as Modbus and IEC 61850, allowing integration with SCADA systems and power equipment condition monitoring platforms.
IV. Product Parameters
|
Item |
Specification |
|
Monitoring Object |
High‑voltage power cables, joints & terminations |
|
Detection Sensitivity |
≤10pC |
|
Sampling Bandwidth |
30MHz‑300MHz(Broadband) |
|
Analysis Pattern |
PRPD 3D patterns, 2D phase patterns, and trend curves |
|
Communication Protocol |
Modbus‑RTU/TCP,IEC 61850 |
|
Operating Temperature |
-40℃ ~ +70℃ |
|
Protection Grade |
Data Acquisition Unit IP65 |
|
Power Supply |
AC 85‑265V / DC24V Optional |
V. Scope of Supply
- PD acquisition unit
- High‑frequency PD sensors
- Communication module
- System monitoring software
- Installation accessories & wiring kit
- User manual
VI. Customization Options
‑ Customizable monitoring channels for single or multi‑loop cables.
‑ Protocol adaptation & secondary development for customer‑existing platforms.
‑ Optional local cabinet deployment or cloud remote access version.
‑ On‑site survey & solution design service available.
VII. Quality
We adhere to global standards and maintain an environment of the highest quality.

VIII. Real-World Collaboration Cases
IX. Application Scenarios
‑ Urban power grid & substation
‑ Industrial parks
‑ Commercial complex
‑ Data center
‑ Rail transit & subway
‑ Renewable energy power station
‑ Large‑scale infrastructure projects
X. Our Service
Our after-sales service and technical team solemnly promises
Pre-Sales Service
Consultation & Guidance: 24/7 online support with expert engineers to clarify needs, recommend solutions, and advise on pricing and processes.
On-Site Inspection: Engineers visit sites for precise measurements and environmental assessment, deliver detailed reports to support tailored system design.
Wide Applications
We offer a variety of transmission components, including sprockets, roller chains, gears, couplings, racks, hubs, pulleys, taper sleeves, bearing seats, and more.
XI. Notification Regarding Technical Issues
1. Installation Key Points
English Install sensors on grounding points of cable terminals / joints; properly ground acquisition unit; keep communication cables away from high‑power cables to reduce interference; configure IP & communication parameters in software to read real‑time PD data.
2. Common Technical Tips
English ‑ No data: Check power supply, wiring and network link. ‑ Mass interference signals: Check sensor grounding condition and adjust software filter parameters. ‑ High PD reading: Distinguish real discharge from external interference, make comprehensive judgment combined with PRPD patterns.
XII. Packaging and Transportation

XIII. FAQ
Q: Does this system need power cut for installation?
A: No power outage required. The sensors are installed on the grounding wire of cable terminals/joints under live line condition, without interrupting cable power supply.
Q: What voltage level of cable is this system suitable for?
A: It is widely applied for 6kV 220kV high voltage power cables. We can customize sensors for special voltage grade projects.
Q: Can the system locate the source of partial discharge?
A: Yes. The system analyzes partial discharge signals collected by the sensors to help identify the discharge location along the cable line, making it easier for maintenance teams to locate potential insulation problems and arrange further inspections.
Hot Tags: online partial discharge monitoring system for cable, China online partial discharge monitoring system for cable manufacturers, suppliers, factory
Send Inquiry
You Might Also Like






