Blog

Introduction In electrical power systems, the way the neutral point of a transformer or generator is grounded plays a critical role in determining the system's safety, reliability, and insulation

📋 Table of Contents External Overvoltages: Lightning-Induced Surges Internal Overvoltages: System-Generated Transients Temporary Overvoltages Switching Overvoltages Resonant Overvoltages Summary Comp

Power System Overvoltage Types: Causes, Effects, and Protection Strategies for Medium-Voltage Equipment Understanding overvoltage is essential for protecting transformers, switchgear, and cable system

Epoxy Resin Dry Type Transformer Everything you need to know about cast resin dry type transformers - from core technology and safety features to installation best practices and application scenarios.

A reliable Surge Arrester Monitoring system is essential for protecting high-voltage electrical equipment from overvoltage damage. By continuously tracking leakage current and cumulative action counts

In high-voltage switchgear rooms, GIS rooms, and other power facilities, an SF6 gas monitoring system is a critical technology for ensuring equipment safety and personnel health. Proper installation n

Fiber Optic Installation and Maintenance Operating Procedures I. Personnel Qualifications and Basic Fiber Optic Operation Procedures 1. Fiber optic installation and maintenance must be performed by ri

Guidelines for Use and Maintenance 1. Introduction to System Composition This system mainly consists of three parts: Perception unit: including ultra-high frequency, high-frequency current, and ultras

Precautions for Operation and Maintenance Personnel 1. Routine Inspection Regularly inspect to verify data normality. Check system status after any power switching. Monitor carrier gas pressure gauge

1. Basic Condition Check Verify equipment integrity through visual examination. Confirm porcelain bushings are clean and undamaged; check for oil leaks on tanks and radiators; ensure nameplates and ma

I. Visual & Sealing Inspection Verify structural integrity and sealing: Check bushings, tank, radiators, and conservator for damage, leaks, or corrosion. Ensure nameplate/phase markings are legibl

1. Foundation Condition Inspection Confirm that the winding surface is clean and undamaged, and the insulation is normal; the grounding bolts of the core, clamps, and casing are securely tightened. Ch