Can surge arrester monitoring contribute to grid resilience?
Leave a message
If you’ve ever stood in front of a control room screen at 2 a.m., watching a red light blink for a transmission line that just dropped offline, you know grid resilience isn’t just a buzzword—it’s the difference between a hospital’s emergency generator powering up when it needs to, or a neighborhood’s fridge full of vaccines thawing because the grid failed. For too long, utilities have relied on reactive maintenance: waiting for a surge arrester to fail, then replacing it, which means unplanned outages, costly repairs, and even safety hazards for line crews working to fix issues in the dark. But as a surge arrester monitoring supplier, I’ve spent the last decade showing utilities that proactive, data-driven monitoring isn’t just a nice-to-have—it’s a core part of building a grid that can withstand extreme weather, aging infrastructure, and the growing demand for reliable power. This is the story of how surge arrester monitoring is shifting the conversation from “what broke?” to “what’s next?” and how that’s making grids stronger.
Let’s start with the basics: surge arresters are the unsung heroes of the power grid. They’re small, cylindrical devices installed on transmission lines, substations, and transformers, designed to divert dangerous voltage surges—from lightning strikes, switching operations, or nearby equipment faults—away from sensitive components. Without them, a single lightning bolt could take out a whole substation, leaving thousands without power for days. But for all their importance, surge arresters are vulnerable. Over time, they degrade: moisture seeps into their porcelain housings, the zinc-oxide discs inside crack, or contamination builds up on their surfaces. When that happens, they stop working when you need them most. The problem? Most utilities only check their surge arresters during annual or bi-annual manual inspections, which means degradation can go undetected for months or even years. By the time a crew shows up, the arrester has already failed, and the grid is at risk.
That’s where surge arrester monitoring comes in. Unlike manual checks, which only give a snapshot of an arrester’s health at a single moment, continuous monitoring tracks real-time data on key performance metrics: leakage current, temperature, partial discharges, and the health of the arrester’s insulation. Leakage current, for example, is the small amount of electricity that flows through an arrester when it’s operating normally. As an arrester degrades, that current increases, and its harmonic components change—data that a good monitoring system can flag before it turns into a failure. Partial discharges, tiny electrical pulses that occur when insulation breaks down, are another early warning sign that manual inspections can’t catch. That’s why many of our clients also pair surge arrester monitoring with other critical tools, like an Online Partial Discharge Monitoring System for GIS, to get a complete picture of substation health. GIS, or Gas-Insulated Switchgear, is common in dense urban areas and harsh environments, and its compact design makes internal issues hard to spot without continuous monitoring.
But how does this actually improve grid resilience? Let’s talk about real-world examples. A few years ago, we worked with a utility in the Upper Midwest that was seeing a string of unplanned outages during summer thunderstorms, which are common in the region. Their manual inspections had flagged nothing wrong, but after installing our surge arrester monitoring system, we picked up an unusual spike in leakage current on a 115 kV arrester on a key transmission line. The data showed that the current’s harmonic profile had shifted, a sign that the arrester’s internal disc was starting to degrade. The utility was able to schedule a replacement during a planned maintenance window, avoiding a potential outage that would have affected 12,000 customers. That’s the kind of proactive action that turns a risk into a non-event.
Another client, a coastal utility in the Gulf Coast, faces a different threat: saltwater corrosion. Salt air eats away at substation components, including surge arresters, leading to surface contamination and increased leakage current. Before monitoring, the utility was replacing arresters every five years as a precaution, regardless of their actual condition. With our surge arrester monitoring, they now have a data-driven schedule: arresters in the most corrosive areas are checked more frequently, while those in cleaner areas last up to 10 years. That cuts maintenance costs by 30%, but more importantly, it means they’re only replacing arresters that actually need it, so there’s less downtime and a lower chance of a failed arrester during a hurricane. Last year, when Hurricane Ida made landfall, that utility’s surge arresters all performed as expected, because the monitoring system had already flagged and fixed two degraded units before the storm hit. That’s grid resilience in action.
But surge arrester monitoring isn’t just about preventing failures from external threats like storms or lightning. It also helps utilities deal with the challenges of aging infrastructure, which is a huge problem across North America and Europe. The average age of a transmission substation in the U.S. is over 40 years old, and many of those surge arresters were installed in the 1980s and 1990s. Those older devices were built with materials that degrade faster over time, and many don’t have built-in monitoring capabilities. Manual inspections for these older units are even harder—crews have to climb poles or work in confined substation spaces, which is dangerous and time-consuming. Our monitoring systems are easy to retrofit, though: they attach directly to the arrester without needing to replace the whole unit, so utilities can get data on their aging assets without a massive capital investment. That’s a game-changer for utilities that can’t afford to upgrade every substation at once, but still need to improve reliability.
Wait, but what about other monitoring tools? I often get asked: why surge arresters specifically, instead of monitoring all substation equipment? The answer is that surge arresters are a critical, often overlooked, point of failure in the grid. A recent study by the North American Electric Reliability Corporation (NERC) found that surge arrester failures account for about 8% of unplanned substation outages, and that number jumps to 15% during severe weather events. That’s a significant share, and one that’s manageable with targeted monitoring. Of course, pairing surge arrester data with other systems gives an even clearer picture. That’s why many utilities integrate our surge arrester monitoring with other tools, like a SF6 Gas Online Monitoring System, for switchgear, or a Sf6 Gas Monitoring System for other components. SF6 gas is used in many high-voltage devices, and leaks or pressure drops can indicate serious issues, so combining that data with surge arrester health gives a complete view of substation reliability.
Another way surge arrester monitoring improves grid resilience is by helping with predictive modeling. Utilities are increasingly using AI and machine learning to forecast grid issues, and surge arrester data is a key input. When a monitoring system collects years of data on an arrester’s performance, it can identify patterns: for example, how leakage current changes with temperature, humidity, or lightning activity. That data can be fed into a predictive model that forecasts when an arrester is likely to fail, allowing utilities to prioritize maintenance. For example, if a model predicts that an arrester in a drought-prone area is at higher risk during a heatwave, the utility can inspect it proactively, before a heatwave leads to higher demand and more stress on the grid. That’s the kind of intelligent planning that makes grids more resilient, especially as extreme weather events become more frequent.
But I’ll be honest: surge arrester monitoring isn’t a silver bullet. There are challenges. For one, data overload. A single substation with 20 surge arresters can generate hundreds of data points a day, and if that data isn’t organized and analyzed properly, it can be overwhelming for control room teams. That’s why our monitoring systems come with built-in analytics tools that automatically flag unusual events, so operators don’t have to sift through every data point. Another challenge is standardization: different utilities use different types of surge arresters and monitoring tools, so a system that works for one utility might need customization for another. But that’s where our team comes in—we work with each client to tailor a system that fits their specific grid needs, whether they’re a small rural utility or a large transmission company.
One common misconception is that surge arrester monitoring is only for large utilities with big budgets. That’s not true. We’ve worked with small rural utilities that serve a few thousand customers, and for them, our monitoring systems are a small investment that pays off in avoided outages. For example, a rural utility in the Rocky Mountains used to have to wait for a crew to drive two hours to a remote substation every time there was a lightning storm, to check their surge arresters. With our monitoring system, they get real-time alerts, so they only send a crew if there’s a real issue. That cuts travel time and costs, and means they can respond faster when there is a problem. For small utilities, that’s a huge boost to grid resilience, because they often have fewer resources to handle outages.


Looking ahead, surge arrester monitoring will become even more important as grids evolve. The rise of renewable energy—wind and solar farms, which are often located in remote areas and connected to the grid via long transmission lines—means more surge arresters are needed to protect those lines. And as more electric vehicles (EVs) are added, the demand for power will increase, putting more stress on grid components. Surge arresters will be even more critical to protecting transformers and other equipment from the surges that come with increased switching of renewable energy. Monitoring those arresters will be essential to ensuring that the grid can handle this growth without compromising reliability.
Another trend is the integration of surge arrester monitoring into smart grid systems. Smart grids use two-way communication between the grid and control centers, and monitoring data is a key part of that. A smart grid can use surge arrester data to automatically adjust power flows, or to alert crews to a potential issue before it causes an outage. For example, if a monitoring system detects a failing arrester, the control center can redirect power around that substation, preventing an outage while a crew is dispatched. That’s the kind of automated response that makes grids much more resilient to disruptions.
At the end of the day, grid resilience is about being prepared for the unexpected. It’s about not just fixing problems when they happen, but preventing them in the first place. Surge arresters are one of the most important components in the grid, but they’re often overlooked until they fail. By investing in continuous surge arrester monitoring, utilities can catch issues early, schedule maintenance strategically, and avoid unplanned outages that disrupt lives and businesses. We’ve seen it work time and time again: a utility installs our surge arrester monitoring system, detects a degraded arrester before it fails, and keeps the power on for their customers. That’s the impact we’re proud to be part of.
If you’re a utility looking to improve your grid’s resilience, or just want to learn more about how surge arrester monitoring can work for your assets, we’re here to help. We’ve spent years refining our systems, working with utilities of all sizes, and combining our expertise with tools that give you the data you need to make smart decisions. Contact us today to start a conversation about how we can help strengthen your grid.
References
- North American Electric Reliability Corporation (NERC). (2022). Surge Arrester Performance and Failure Trends in Bulk Power System Equipment. Atlanta, GA: NERC.
- International Council on Large Electric Systems (CIGRE). (2021). Condition Monitoring of Surge Arresters for High-Voltage Substations. Paris, France: CIGRE.
- U.S. Department of Energy (DOE). (2023). Grid Resilience Through Proactive Asset Monitoring. Washington, D.C.: DOE Office of Electricity.
- IEEE Power & Energy Society. (2020). Guide for the Application of Surge Arresters for AC Power Systems. PES Standard C62.22-2020.
- Global Energy Storage Association (GESA). (2022). Integrating Renewable Energy and Monitoring Tools for Grid Reliability. Washington, D.C.: GESA.





